|
Session
INT 17
#0355
Ultrasonic Effects On PLA/PCCD Blend During
Melt Compounding Process
Youngbum Kim, Sogang University
TOP
Session
INT 16
#0384
Continuous Production Of Polymer Blends
Nanocomposites Using Ultrasonic Extruder
Kyung Yl Kim, Sogang University
TOP
Session
INT 1
#0046
Effective Use Of Filling Simulations To
Balance Hot Runner Systems
Harsh Bhagat, Ticona
TOP
Session
INT 2
#0870
Next Generation Antimicrobials For Wood
Filled Plastics
William Woods, ISP
#0305
Effect of Shear Mixing Conditions On Emi
Shielding Effectiveness And Electrical Properties
Of Vgcnd Filled Thermoplastic
Mohammed Al-Saleh, University of Alberta
#0157
Effects Of Fillers Shape Factor On The
Performance Of Thermally Conductive Polymer Composites
Sun Ho Park, Samsung Cheil Industries
#0091
Rheological And Mechanical Properties
Of Hdpe-Wood Composites: Effects Of Filler-Filler
And Polymer-Filler Interactions
Jing-Jing Zhang, South China University of Technology
#0598
Uv-Curing Of Acrylate Thin Films On Particulates
Through Free Radical Polymerization Mechanism
Costas Gogos, New Jersey Institute of Technology
TOP
|
Engineering Properties
& Structure |
Session
INT 3
#0941
Kinetics Of Microemulsion Copolymerization
Followed By Raman Spectroscopy
Eduardo Mendizabal, University de Guadalajara
#0336
The Formation Of Structure In Ptfe Porous
Membranes Induced By The Uniaxial Stretching Operation
Hsu Ping-Shun, CYCU
#0343
Effect Of Norbornene Content On The Physical Properties Of Cyclo Olefin Copolymers
Ho-Jong Kang, Dankook University
TOP
Session
INT 4
#5030
Numerical Investigation Of Effect Of Screw Geometry On Mixing In A Cooling Extruder
Lilac Wang, University of Toronto
#0030
Pressure/Flow Performance Of Viscoelastic Polymeric Melts In Cylindrical Channels
Hossein Hosseini, University of Tabriz
TOP
| Failure
Analysis & Prevention |
Session
INT 5
#0239
Mechanical Properties Of Ps Injected Parts
Under Surface-Active Substances
Maria Candal, Universidad Simon Bolivar
TOP
Session
INT 18 #0373
Multilayer Polypropylene/Ethylene Co-Vinyl
Alcohol Films For Food Packaging Applications
Sarah Schirmer, US Army NSRDEC
TOP
Session
INT 6
#0259
Effect Of Four Stress Concentrators Over
The Mechanical Properties Of Injected Plastic
Parts
Maria Candal, Universidad Simon Bolivar
#0482
Effects Of Processing Parameters On Shrinkage
Uniformity Of Injection-Compression Molded Part
Han-Xiong Huang, South China University of Technology
#0557
Study On Cellular Structure And Skin Layer
Thickness Of Micocellular Injection Molded Parts
Using Newly-Developed Equipment
Han-Xiong Huang, South China University of Technology
#0702
Effect Of Organoclay On The Mechanical
/ Thermal Properties Of Microcellular Injection
Molded Polystyrene-Clay Nanocomposites
Shyh-shin Hwang, Ching-Yun University
#0778
The Relationship Between Processing-Thermomechanical
Environment And Structure On Injected Flat Parts
Sobeida Villarroel, Universidad Simon Bolivar
#0784
Experimental Verifications Of Cae Predictions
On Birefringence Of Injection Molded Lenses
Huai En Lai, National Tsing Hua University
#0792
Variable Mold Temperature For Improving
Surface Quality Of Microcellular Injection Molded
Parts Using Induction Heating Technology
Chen Shia-Chung, Chung Yan Christian University
#0806
Effects Of The Mechanical Properties On
The Scratch Behavior Of Abs Copolymer
Keehae Kwon, Cheil Industries Inc.,
#0809
Learning Efficiency Of Using Virtual Manufacturing
In E-Learning For The Operation Technology Of
Injection Molding Machine
Chen Shia-Chung, Chung Yan Christian University
#0820
Use Of Linear Relationships And Simulation
To Assess The Effect Of The Injection Parameters
On The Dimensions Of Polypropylene Test Specimens
Melissa Trejo, Universidad Simon Bolivar
#0822
Development Of An Automated Optimizer
Of Cooling Circuit In Injection Molding
Byung-Ohk Rhee, Ajou University
#0824
Effect Of Rheological Characteristics
Of Resin On The Performance Of The Runner Valve
In Family-Mold
Baeg-soon Cha, KITECH
#0830
Structural Analysis For The Deformation
Of The Inner Tube Of Electric Power Plugs Manufactured
By Injection Molding Process
Hyung-Pil Park, KITECH
#0898
Effect Of Injection Conditions On Fracture
Behavior Of Hips At Low Strain Rate Studied By
Design Of Experiments
Johan Sanchez, Universidad Simon Bolivar
TOP
Session
INT 7
#0774
A Managers´ View Of Critical Factors
Of Plastic Clusters Performance
Drahomira Pavelkova, Tomas Bata University in
Zlin
TOP
Session
INT 8
#0009
Novel Dual Electrode Mode Electro-Spinning
Of Biodegradable Polymers
Chungmeng Lu, Polymer Processing Institute
#0724
Characterization Of Bioactive Polycaprolactone
Paula Douglas, PPRC
#0455
The Effects Of Dynamic Polymer Melt Manipulation
Of The Bioinert And Biodegradable Performance
Of Injection Molded Biomedical Products
John Coulter, Lehigh University
#0692
Sol-Gel Derived Polycaprolactone / Castor
Oil Based Copolyurethanes For Medical Applications
Hugh Lippincott, University of Massachusetts Lowell
#0755
Polypropylene Bio-CD: A novel photoluminescence
based estimation of Glucose concentration with
ultrasonic technology as an enabler
Srikanth Vengasandra , Iowa State University
TOP
Session
INT 9
#0977
Learning Efficiency Of Using Virtual Manufacturing
In E-Learning For The Operation Technology Of
Injection Molding Machine
Shuan-Liang Lin, National Central University
#0265
Student Projects Completed In An Injection
Molds Design Course Of The Polymer Engineering
Career
Rosa Morales, Universidad Simon Bolivar
TOP
Session
INT10
#0760
Thermal Degradation Of Fiber-Reinforced
Bio-Based Rigid Polyurethane Foams
Guillermo Jimenez, National University of Costa
Rica
#0761
Rigid Composite Materials From Olive Brush
Seed And Unsaturated Polyester Resin
Guillermo Jimenez, National University of Costa
Rica
#0762
Natural Adhesives From Novel Sources
Guillermo Jimenez, National University of Costa
Rica
#0975
Mechanical Properties Comparison Of Bio-Based
And Synthetic Materials When Submitted To Different
Environmental Conditions
Ocileide da Silva, INdT
#0896
Hydrolytic Degradation Of Polylactic Acid
Micro- And Nanocomposites
Quyuan Zhou, New Jersey Institute Technology -
Chemical Engineering
TOP
Session
INT 19
#0697
Development Of A Pressure Driven Micro-Rheometer
Younggon Son, Kong National University
TOP
| Polymer
Modifiers & Additives |
Session
INT 11
#0054
Effect Of Accelerants On Epoxy’s
Cure Rate And Mechanical Properties
Nicole Larson, WWU
#0799
Rheological Properties Of Branched Polystyrene
Prepared By An Ultrasound Assisted Intensive Mixer
Hee Jung Kim, Sogang University
#0966
Pet/Ep-G-Ma Blend System: A Practical
Way To Recycle Post Consumer Plastics Into Value
Added Products
Fares Alsewailem
#0288
Laser Surface Treatment Of Thermoplastic
Polymers: Influence Of The Atmosphere Nature
Pascal Pignolet, Universite de Pau et des Pays
de l'Adour
#0875
Fluid Energy Mill Process Simulation for
Manufacturing Micron-size Polymeric Composite
Particulates
Peng Wang, New Jersey Institute of Technology
TOP
|
Process Monitoring & Control |
Session
INT 12
#0051
A Comparison Of Statistical Process Control
And Principal Components Analysis
Sarah Westerdale, University of Massachusetts
Lowell
#0839
Effect Of Thermal Conductance To Mold
On The Temperature Rise Measured By Resin Temperature
Sensors
Byung-Ohk Rhee, Ajou University
TOP
Session
INT 14
#0534
Paclitaxel Attachment To Pla-Pha Blend
Films
Courtney Taylor, Clemson University
#0773
A Study On The Blends Of Hdpe And Lldpe
For Rotomolding Applications
Alexandra Fabre, ENSIACET
TOP
Session INT 15
#0549
An Investigation into The Merits of Using
Naturally Derived Polyurethanes based on Castor
Oil as a Barrier Material in Saline Aqueous Solutions.
Aba Mortley, Royal Military College of Canada
|
