SPE Library


The SPE Library contains thousands of papers, presentations, journal briefs and recorded webinars from the best minds in the Plastics Industry. Spanning almost two decades, this collection of published research and development work in polymer science and plastics technology is a wealth of knowledge and information for anyone involved in plastics.

The SPE Library is just one of the great benefits of being an SPE member! Are you taking advantage of all of your SPE Benefits?

Not an SPE member? Join today!

Use % to separate multiple keywords. 


Search SPE Library
    
    




Sort By:  Date Added   Publication Date   Title   Author

Conference Proceedings

AN ENGINEERING APPROACH TO THE CORRECTION OF ROTATIONAL FLOW CALCULATIONS FOR SINGLE-SCREW EXTRUDERS - EQUATION CORRECTION
Mark Spalding, Gregory Campbell, May 2011

Simulation of single-screw extruder screws using the standard pseudo-Newtonian method is known to deviate from measured performance. Part of this deviation is caused by the calculation of the drag flow rate. Previous research has shown that the calculation of the drag flow rate using this method is higher than that in the actual channel, causing the pressure gradient to be incorrectly adjusted to compensate for the error in the drag flow term. The research here provides the correction factors for rotational flow (historically known as drag flow) such that axial pressure gradients can be quickly and accurately calculated.

DESIGN ASPECTS OF DISCONTINUOUS MOLD COOLING TECHNIQUES
Christian Hopmann, Walter Michaeli, Silke Allert, May 2011

The use of pulsed cold water instead of tempered coolant is suggested to be a versatile and cost-efficient technique for the cooling of injection molds. But the advantages and limitations of such discontinuous cooling strategies are still a controversial issue. In this paper the behavior of a discontinuous temperature control system is analyzed. The heat balance of a test mold is monitored and the inter?ªaction of adjacent cooling circuits is identified. It is demonstrated that the appropriate placement of the sensor whose signal is used as an input variable for the temperature control system is of crucial importance.

DEVELOPMENT OF A REACTIVE EXTRUSION PROCESS FOR THE CONTINUOUS SYNTHESIS OF POLYESTERAMIDES
Felixine Siegmund, Manisha Gupta, Xiaomin Zhu, Edmund Haberstroh, Martin Moller, May 2011

Polyesteramides are among degradable polymers, which are of great interest for a wide variety of applications. In this paper we report a novel reactive extrusion process for the continuous synthesis of polyesteramides. It is based on anionic ring-opening polymerization of e-caprolactam in the melt of commercially available polyester - polycaprolactone. By this means polyesteramides of different chemical compositions were successfully prepared with high yield. Process simulation was carried out using obtained process and material data.

INFRARED WELDING OF ENGINEERING PLASTICS VIA SHORT-WAVELENGTH IR EMITTERS
Tobias Beiss, Jordan Kurikov, May 2011

To demonstrate the feasibility of infrared welding of engineering thermoplastics, studies on PA66 and PBT were conducted. The weldability of engineering thermoplastics is demonstrated in the investigations carried out. Important process parameters such as pressure control, change-over times and tolerances in positioning the IR emitter were identified. It is remarkable, that engineering plastics (PBT & PA66) that are similar in use have a totally different melting behavior. The melting process has to be adapted accurately to meet the specific requirements of the material.

BIAXIALLY ORIENTED MULTILAYERED POLYMER FILMS FOR ENERGY STORAGE APPLICATIONS
Joel Carr, Matthew Mackey, Anne Hiltner, Eric Baer, May 2011

Polymer films with enhanced dielectric properties are essential for the production of high energy density polymer film capacitors. By capitalizing on the synergistic effects of microlayering and biaxial orientation, polymer films using PET and a PVDF copolymer were produced which exhibit breakdown fields as high as 1000 kV/mm and energy densities as high as 16.2 J cc-1. Using needle/plane electrodes the fracture zones were investigated and it was evident that the layered films possessed a different fracture mechanism when compared to the single component films.

LASER SINTERING PROCESSES: PRACTICAL VERIFICATION OF PARTICLE COALESCENCE FOR POLYAMIDES AND THERMOPLASTIC ELASTOMERS
Mike Vasquez, Neil Hopkinson, Barry Haworth, May 2011

Polymer laser sintering is an Additive Manufacturing technology that has been implemented in a variety of industries from automotive and aerospace to the sports and leisure sector. This paper will explore the use of hot stage microscopy (HSM) and differential scanning calorimetry (DSC) to measure and observe powder polymer behavior with respect to the requirements for laser sintering. By observing this behaviour in a range of polyamides and thermoplastic elastomers, the results can be used as a tool for improved development of future materials, and potentially for process optimization, allowing laser sintering to compete in high volume manufacturing environments.

INVESTIGATION OF THE EXPANSION BEHAVIOR OF PE-LD FOAMED WITH CO2
Christian Hopmann, Walter Michaeli, Tilo Hildebrand, May 2011

The combination of PE-LD and CO2 to extrude foamed semi-finished products is widely spread. Especially for the extrusion of foamed sheets the decrease in density and cell size leads to an effect, which reveals a wavy pattern transverse to the machine direction and is known as corrugation. Since this effect has not been investigated yet, it is systematically investigated in a research project at the IKV. The aim of the project is to determine the foaming, process and foam parameters which lead to corrugation and thereafter develop strategies to minimize the corrugation in foamed sheet extrusion.

EXPERIMENTAL STUDY ON INJECTION MOLDING OF WHEAT-STRAW/HDPE COMPOSITES
Fang-fang Wang, Haimei Li, Yong-li Zhang, Hong-lei Li, Sheng-chao Chen, May 2011

Filling polymers with wheat straw can be environmentally responsible and reduce cost. Nowadays most composites with natural fibers are processed by compression molding. This study examined the feasibility of manufacturing wheat-straw and high-density polyethylene composites by injection molding. MFI and thermal analysis of composites with different wheat straw contents were characterized. Mechanical properties of injection molded composites were measured. It has been found the melt points of all composites were about 135C. The fluidity, tensile and impact strengthes of the composites decreased while the wheat straw content increased. However, the flexural strength increased slightly with the increase in wheat-straw content.

BOSS DESIGN AND OPTIMIZATION FOR MICROCELLULAR FOAM INJECTION MOLDED PARTS
Levi Kishbaugh, Uwe Kolshorn, May 2011

There are two basic models companies following when implementing the MuCell microcellular foam injection molding process. The first and most common implementation is to apply the technology to a part designed for solid. The second implementation involves parts designed specifically to optimize performance with the microcellular foam process. In either case, the customer needs to understand the expected performance of the fastening mechanism. This study identifies the achieveable fastening performance with screws when using boss designs for standard solid injection molding and also identifies the optimum design geometry for microcellular foam molded boss design.

MICRO INJECTION MOLDING: CHARACTERIZATION OF CAVITY FILLING PROCESS
Nan Zhang, Jing Chu, Michael Gilchrist, May 2011

Based on reciprocating micro injection molding machine, this paper characterizes the influence of machine process parameters and its transition response from velocity control to pressure control (V-P transition) on the micro cavity filling process. The method of Design of Experiment was employed to systematically and statistically investigate the effect of machine parameters on actual cavity filling process, which was described by the defined process characteristic values (PCVs). The statistical analysis indicated that injection speed was dominated factor affecting all PCVs in cavity filling process. It was also found that the machine V-P transition have significant effects on cavity filling.

EVALUATION OF BIODEGRADABLE COPOLYESTER RESINS WITH INCREASED GREEN CONTENT
Husnu Alidedeoglu, Ganesh Kannan, May 2011

Three different biodegradable copolyesters with increased green content (starting from 31 %) made from recycled post consumer poly(ethylene terephthalate) (PET) were evaluated in comparison to commercial poly(butylene terephthalate-co-adipate) (PBAT) in terms of thermal, rheology, and physical properties. The melting temperature of the resins is lower compared to commercial PBAT due to the presence of isophthalate and traces of diethylene glycol (DEG) linkages from PET. The melt flow values are 2.5 times higher than those of commercial PBAT, which has extensive branching. New resins show low crystallinity, high flexibility, and no break at maximum elongation compared to commercial PBAT.

THE INJECTION COMPRESSION EFFECTS ON THE OPTICAL PROPERTY BEHAVIOR FOR INJECTION PARTS
TzuChau Chen, Hsien-Sen Chiu, CT Huang, Shi-Chang Tseng, Min-Tsung Kao, Rong-Yeu Chang, May 2011

Injection compression molding (ICM) has been utilized in the manufacturing of optical parts since this molding process can improve optical property with reduced flow-induced residual stress and warpage. In this study, a true 3D simulation technology has been employed to predict flow-induced residual stress in ICM process by considering viscoelastic behavior of plastic materials. The optical behaviors of products are simulated according to photoelasticity theory. The simulations are performed with a two-cavity model of spherical lens. The process condition effects, including compression gap, compression speed compression time and delay time, on birefringence, residual stress and warpage results are investigated.

OPTIMIZATION OF MOLDING CONDITIONS OF A PLUG-ASSISTED THERMOFORMED THIN CONTAINERS IN A HIGH SPEED AND VOLUME PRODUCTION CONTEXT.
Michel Labonte, May 2011

For an industrial thermoformer, thermoforming plastic thin containers using a plug involved technological knowledge on material behavior, plug material and process variables. Technical papers on the subject exist but not with reference to the optimization of process conditions on high speed and high volume lines. Design of Experiments (DOE) approach like the Taguchi method can be used to refine the process and to minimize rejects. In this paper, a case study on thermoforming PET thin containers on a high output industrial machine using a single criteria based on the Taguchi method for optimization of wall thickness distribution is discussed.

THE LIQUID-LIQUID SEPARATION AND RHEOLOGY OF BINARY STRONG INTERACTION SYSTEM
Sijun Liu, Chixing Zhou, Wei Yu, May 2011

It is important to discern the liquid-liquid phase separation (LLPS) and crystallization from UHMWPE- liquid paraffin solution in order to control the membrane forming process. Since the UHMWPE- liquid paraffin solution belongs to a binary strong interaction system, accustomed methods such as DSC, light scattering, and optical microscopy (OM) are not so suitable. By adopting an inversing quenching rheological method we successfully obtained LLPS temperature of the polymer solution. The results show that viscoelastic properties are more sensitive to concentration fluctuation of L-L phase separation at the early stages than other methods.

PRECISION POLYMER NANO-MOLDING WITH ANODIC ALUMINUM TEMPLATE
Hiroyuki Itoh, Akira Haryu, Shohei Takahagi, Tetsuo Takayama, Takashi Kyotani, May 2011

Nano-patterning was achieved by application of nano-porous anodic aluminum oxide (AAO) template as mold inserts in injection molding and thermal nano-imprinting. Depending on the AAO template used, the nano-holes have a diameter of 30 200 nm and a depth that varies from a few hundred nanometers to 60 micro meter. Effects of structure size on polystyrene surface properties were investigated. The replication accuracy was improved using a heat insulator and a high-flow-grade polymer. Results showed high replication of surface nano-features, 30nm rod features, using the injection molding process.

THREE DIMENSIONAL VISUALIZATION OF WATER PENETRATION AND MELT BEHAVIOR IN WATER ASSISTED INJECTION MOLDING
Fu-Hung Hsu, Chih-Chung Hsu, Yi-Chuan Wu, Chao-Tsai Huang, Rong-Yeu Chang, Shih-Jung Liu, May 2011

Water-assisted injection molding has some benefits over conventional injection molding such as shorter cycle time. The current study started from simulations of the flow behavior of various models. Theoretical methods and a numerical solver (Moldex3D R10) were used as the analysis tools. By using its three-dimensional visualization ability, water penetration behavior is easier to understand. Different processing condition effects related to water penetration length were investigated. The current research also focused on core out effects with different models. The results showed good agreement with experimental data and are helpful in understanding flow behavior in water-assisted injection molding.

BIOPOLYMER DATABASE EVALUATING QUANTITY, QUALITY AND COMPARABILITY OF BIOPOLYMER MATERIALS
Maren Bengs, Hans-Josef Endres, Andrea Siebert-Raths, Erwin Baur, May 2011

The biopolymer database offers a knowledge platform about biopolymers with producer data and newly measured comparable properties. The database reflects the market situation and serves as connection between manufacturers, converters and end users. Many features allow search and compare possibilities to find the right material. In further working steps the database will be upgraded with processing properties, additives, examples of applications, etc. By using different methods like a questionnaire, interviews, etc the suggestions of the polymer industry will be integrated.

NANOPOROUS POLYCARBONATE FILM WITH HIGH ASPECT RATIO PREPARED BY ION TRACK ETCHING TECHNIQUE
Yuko Takagi, Kishin Ozawa, Keiichi Zouta, Koshi Koide, Yoshihiro Kayano, May 2011

Polycarbonate (PC) films with nanopores of a highly regulated size and shape were successfully prepared by ion track etching technique. The pores penetrated the films with a thickness of up to 100m, and the aspect ratio of the pores was nearly a thousand, which is outstanding result among those reported to date. Optimized etching conditions led to the effective etching of the ion tracks, and the addition of surfactant into the etching solution also heavily influenced the constitution of the pores.

MOLECULAR WEIGHT EFFECT ON SCRATCH BEHAVIOR OF INJECTION-MOLDED POLYPROPYLENE
Mikihiko Fujiwara, Hiroyuki Hamada, Yuuji Ryousho, Takashi Yuasa, Masaya Kotaki, May 2011

Polypropylene (PP) is increasingly utilized in various engineering applications because of its lightweight and good mechanical properties balance. Scratch resistance is crucial for various applications such as automotive interior parts. It's important to understand structure-property relationships in order to develop high performance PP. Molecular weight effect on scratch behavior is investigated in this paper. It was found that yielded zone size under scratched surface was correlated well with scratch visibility. Smaller yielded zone was formed in the case of higher molecular weight PP, leading to higher scratch resistance.

MECHANICAL AND MORPHOLOGICAL ANALYSIS OF HDPE / EVA / CACO3 TERNARY BLENDS
Ilias Ali, May 2011

In this article, we report the mechanical and morphological analysis of HDPE, CaCO3 and EVA ternary blend. HDPE/EVA/CaCO3 ternary blends were prepared by melt blend technique. The mechanical properties of these blends were evaluated and found that, the incorporation of EVA modifies the toughness by inducing ductility in these composites. The morphology of these composites were investigated by Scanning Electron Microscopy (SEM). The phase structures of these composites were also investigated. We observed two main types of phase structures in these blends; separate dispersion of the EVA phase or encapsulation of the CaCO3 by EVA.







SPE-Inspiring Plastics Professionals

© 2024 SPE-Inspiring Plastics Professionals.
All rights reserved.

84 countries and 60k+ stakeholders strong, SPE unites plastics professionals worldwide – helping them succeed and strengthening their skills through networking, events, training, and knowledge sharing.

No matter where you work in the plastics industry value chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor what your background is, education, gender, culture or age-we are here to serve you.

Our members needs are our passion. We work hard so that we can ensure that everyone has the tools necessary to meet her or his personal & professional goals.

Contact Us | Sitemap | Data Privacy & Terms of Use

Links

Locations

SPE US Office
83 Wooster Heights Road, Suite 125
Danbury, CT 06810
P +1 203.740.5400

SPE Australia/New Zealand
More Information

SPE Europe
Serskampsteenweg 135A
9230 Wetteren, Belgium
P +32 498 85 07 32

SPE India
More Information

SPE Middle East
More Information

3Dnatives Europe
157 Boulevard Macdonald
75017, Paris, France
More Information

Powered By SPE

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals

SPE ImplementAM

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals




spe2018logov4.png
  Welcome Page

How to reference articles from the SPE Library:

Any article that is cited in another manuscript or other work is required to use the correct reference style. Below is an example of the reference style for SPE articles:

Brown, H. L. and Jones, D. H. 2016, May.
"Insert title of paper here in quotes,"
ANTEC 2016 - Indianapolis, Indiana, USA May 23-25, 2016. [On-line].
Society of Plastics Engineers
Available: www.4spe.org.

Note: if there are more than three authors you may use the first author's name and et al. EG Brown, H. L. et al.

If you need help with citations, visit www.citationmachine.net