SPE Library


The SPE Library contains thousands of papers, presentations, journal briefs and recorded webinars from the best minds in the Plastics Industry. Spanning almost two decades, this collection of published research and development work in polymer science and plastics technology is a wealth of knowledge and information for anyone involved in plastics.

The SPE Library is just one of the great benefits of being an SPE member! Are you taking advantage of all of your SPE Benefits?

Not an SPE member? Join today!

Use % to separate multiple keywords. 


Search SPE Library
    
    




Sort By:  Date Added   Publication Date   Title   Author

Conference Proceedings

ADVANCED MATERIALS FROM NOVEL BIO-BASED RESINS
Shriram Bagrodia, May 2010

Cereplast Hybrid ResinsTM also known asBIOPOLYOLEFINSƒ?› are bio-based plastic resins replacing 50 percent or more of the petroleum content in traditional plastic products with renewable source materials such as starches from corn tapioca wheat and potatoes. The addition of CereplastHybrid Resins TM to the existing line of CompostableResins TM further establishes Cereplast as the leadingsolutions provider in environmental and sustainable plastics. The first product from the Cereplast HybridResins TM family is BiopropyleneTM a 50 percent biobasedresin that can replace traditional polypropylenein many applications. Cereplast Hybrid Resins TM canbe processed at the same cycle time as traditional plastics on conventional equipment but requires less energy in the production process by using significantly lower processing temperatures. Inaddition Cereplast Hybrid Resins TM meet therequirements for toxicity set by ASTM D 6400-04specifications making Cereplast Hybrid Resins TMsafe for all applications. This paper further discusses mechanical properties and potential applications ofBiopropyleneTM.

MORPHOLOGY DEVELOPMENT WITH TENSILE STRAIN IN GLASS FLAKE FILLED POLYPROPYLENE
Katherine M. Shipley , Krishnamurthy Jayaraman , Kevin L. Nichols , Michael H. Mazor, May 2010

The object of this study was to understand the phenomenon of voiding around particles in stretching filled polymers below the melting temperature with plate shaped fillers. Injection molded tensile bars of glass flake filled polypropylene with 20 vol% of glass flakes were subjected to axial strains ranging from 0.1% to 1.0% at130?øC to 150?øC in a tensile frame. The onset ofdebonding in glass flake filled polypropylene at these temperatures was readily identified from stress-strain curves in tensile tests. Substantial void growth was observed around the flakes at strains as low as 0.5% and 1%. Furthermore voids were seen to develop all around the glass flakes rather than just at the ends along the stretch direction.

THERMAL FRACTIONATION BY SSA AS AN APPROACH FOR THE INDENTIFICATION OF BINARY PE BLENDS
Franco Guastaferro Preda , Fabiana Lulli , Johan J. Sánchez, May 2010

Thermal fractionation by Successive Self Nucleation and Annealing (SSA) technique has been used as qualitative method for characterization of the branch distribution in polyethylenes. Low Density and Linear Low Density Polyethylenes differentiate at molecular level by the quantity, distribution and type of branches, and both are widely used in blends, especially for film blowing. In some cases, it is necessary to identify if a film has been produced with a blend, which is difficult if one PE is used in low proportion (less than 30%). By applying modifications to the regular SSA protocol, it was possible to segregate cristallizable fractions of each PE, in proportions as low as 10% in the blend

FINITE ELEMENT SIMULATION OF 3D UNSTEADY VISCOELASTIC FREE SURFACE FLOW WITH LEVEL SET METHOD
Dirk Schmiederer, Ines Kühnert, Ernst Schmachtenberg, May 2010

The simulation of free surface flow is of great engineering significance in polymer processing like injection, blow molding and extrusion. However, its key technology for practical application remains to be difficult in Computation Fluid Dynamics (CFD). In this work, the finite element formulation of level set method for three dimensional free surface flow of a viscoelastic fluid is presented based on the unstructured mesh. The free surface is captured by using the level set approach and the Streamline-Upwind/Petrov-Galerkin (SUPG) scheme is introduced to minimize the numerical diffusion present in the discretized level set equations. A penalty method is employed to solve the flow equation and the constitutive equation with a decoupled algorithm. The computation stability is improved by using the Discrete Elastic-Viscous Split Stress (DEVSS) algorithm with the inconsistent Streamline-Upwind (SU) scheme. The performances of the formulations are demonstrated on a three-dimensional viscoelastic mold-filling flow problem and reasonable results are achieved.

NANO-ASSEMBLED BIAXIALLY ORIENTED POLYPROPYLENE FILMS WITH HIGH OXYGEN BARRIER
Jason Randall, Mary Ann B. Meador, Sadhan C. Jana, May 2010

Biaxially oriented polypropylene (BOPP) films with high oxygen barrier and high clarity were produced through the layer-multiplying, forced assembly process technique. 15-mil thick sheets with 33 alternating polypropylene (PP) / poly(ethylene oxide) (PEO) layers were coextruded and subsequently biaxial oriented at 135-150 ?§C. The biaxial orientation resulted in a layer thickness reduction from the microscale to the nanoscale. Crystallization of PEO was confined in the nano-layers where lamellae could only grow within a two dimensional plane. Highly in-plane oriented PEO lamellae improved the oxygen barrier by an order of magnitude. On the other hand, the films retained the high clarity.

SILICA AEROGELS CROSSLINKED BY FLEXIBLE POLYURETHANES: EFFECTS OF SILANE PRECURSORS ON STRUCTURE-PROPERTY RELATIONSHIPS
Jason Randall , Mary Ann B. Meador , Sadhan C. Jana, May 2010

Although they have only recently become a hot field of interest, aerogels were first developed by Kistler1 in the 1930's by supercritically drying a low solids suspension of colloidal particles. The resulting material was highly porous and possessed low thermal conductivity and low density. It is unsurprising then that aerogels have been used as thermal insulation, in applications ranging from personal footwear2 to battery pack insulation for a Mars rover3. The 'pearl necklace' nanostructure of aerogels, however, is inherently weak as demonstrated by their friability and brittleness. Only about 31 kPa4 of stress is required to completely shatter a native silica aerogel.

IMPROVED DESIGN FOR POLYMER DISTRIBUTION IN FLAT FILM & SHEET EXTRUSION DIES
Rajen Patel, Antonios K. Doufas, Rajesh Paradkar, Ed Knickerbocker, May 2010

A design methodology has been developed for creating an improved flow passage in a flat die that distributes polymer extrudate across the width under a condition of uniform shear rate. This type of flow passage will spread any and all molten polymer materials uniformly regardless of the power law exponent value. This also results in a uniform residence time inside the die which allows for reduced changeover time and material waste. The new method achieves these results in a more compact fashion with reduced wetted area expanding the applications to wider widths than previous constant shear designs.

NANOPARTICLE FILM REINFORCEMENTS FOR HIGH PERFORMANCE AEROSPACE STRUCTURAL PREPREG COMPOSITES
Stephen A. Hutcheson, Gregory B. McKenna, May 2010

Prepreg composites offer many advantages over other types of composite materials such as low void content, control of fiber volume fraction, control of laminate thickness, and others. Nanoparticles have shown to improve mechanical properties when incorporated into composite materials. Incorporation of nanoparticles into prepreg materials can be very challenging if not done at the prepreg fabrication stage. In this study, a novel method of incorporating nanoparticles into prepreg composite materials was explored. This new method allows for selective reinforcement of the prepreg material at critical areas such as stress concentration locations. Surface abrasion and open hole tensile properties of the composites were measured.

EFFECT OF FILLERS SHAPE FACTOR ON THE PERFORMANCE OF THERMALLY CONDUCTIVE POLYMER COMPOSITES
Sun Ho Park , Chang Min Hong , Sungjun Kim , Young Jun Lee, May 2010

As electronic devices tend to slimmer and more integrated management of heat transfer in devices become a big task for device design. Metallic materials are widely used for heat dissipation materials but there are many attempts to replace the metallic materials with highly thermal conductive thermoplastic composites due to their lightweight and economic manufacturing cost. Intrinsically polymers are thermally and electrically insulator but they can turn into thermally conductive material by compounding with thermally conductive fillers such as graphite ceramic filler carbon black carbon fiber or carbon nanotube (CNT). In this research strong correlation of shape of graphite on thermal conductivity was investigated in polymer/graphite composites.

EFFECT OF FILLERS SHAPE FACTOR ON THE PERFORMANCE OF THERMALLY CONDUCTIVE POLYMER COMPOSITES
Sun Ho Park , Chang Min Hong , Sungjun Kim , Young Jun Lee, May 2010

As electronic devices tend to slimmer and more integrated, management of heat transfer in devices become a big task for device design. Metallic materials are widely used for heat dissipation materials, but, there re many attempts to replace the metallic materials with highly thermal conductive thermoplastic composites due to their lightweight and economic manufacturing cost. Intrinsically polymers are thermally and electrically insulator, but they can turn into thermally conductive material by compounding with thermally conductive fillers such as graphite, ceramic filler, carbon black, carbon fiber, or carbon nanotube (CNT). In this research, strong correlation of shape of graphite on thermal conductivity was investigated in polymer/graphite composites.

THE MICROSTRUCTURE OF MICRO-INJECTION MOLDED HIGH DENSITY POLYETHYLENE
Christelle Grein, Doris Machl, Georg Grestenberger, May 2010

Micro-injection moldings were obtained for high density polyethylene (HDPE), to study the effects of processing conditions on the microstructural characteristics and mechanical properties of the moldings. Various microstructural features, such as skin-core structure, skin layer thickness fraction, and distribution of crystalline shape and size, were observed under different processing conditions and analyzed and compared to observations made with poly(oxymethylene) (POM). Process-structure-Youngƒ??s modulus relationships were analyzed by considering the effects of skin layer thickness, average plunger velocity. Suggestions for mold design were proposed on the basis of polymer melt flow behaviour.

HIGH FLOW PP/EPR BLENDS FOR THE AUTOMOTIVE INDUSTRY: BASIC CORRELATIONS BETWEEN EPR COMPOSITIONAND APPLICATION PROPERTIES
Christelle Grein , Doris Machl , Georg Grestenberger, May 2010

Injection molded automotive parts usually feature high flow length to wall thickness ratios. In order to ensure low cycle times, tooling costs and scrap rates, the respective material formulations should have a high flowability. Reducing the viscosity, however, also affects the materials' morphology and mechanical properties, especially the impact strength. To quantify this effect high impact reactor-thermoplastic polyolefins (rTPOs) consisting of polypropylene (PP) blended with in-reactor made ethylene-propylene rubber (EPR) were prepared and tested. Particular attention was paid to the influence of the ethylene-propylene rubber's composition, i.e. comonomer ratio and molecular weight, on application properties of such rTPOs like toughness, surface gloss and scratch resistance.

PT CONTROL METHOD BY CAVITY TEMPERATURE FOR INJECTION MOLDING
Andreas Frank, Gerald Pinter, Reinhold W. Lang, May 2010

It would be of great value to develop dependable strategies for the control of part weight. Based on the Pƒ??Vƒ??T (pressureƒ??volumeƒ??temperature) behavior of the polymer, a Pƒ??T (pressureƒ??temperature) control method by cavity temperature was presented in this study. In the present control method, the total injection time is controlled by cavity temperature instead of time, the relationship between pressure and temperature can be controlled. The experimental results revealed that the Pƒ??T control method by cavity temperature yields a much better part quality and uniform part weight than conventional control method.

LIFETIME PREDICTION OF POLYETHYLENE PIPES BASED ON AN ACCELERATED EXTRAPOLATION CONCEPT FOR CREEP CRACK GROWTH WITH FATIGUE TESTS ON CRACKED ROUND BAR SPECIMENS
Andreas Frank , Gerald Pinter , Reinhold W. Lang, May 2010

Fracture mechanics lifetime and safety assessment of pressurized polyethylene (PE) pipes is based on the knowledge of material specific creep crack growth (CCG). However, with common test methods the investigation of this failure mechanism is not possible in modern PE-pipe materials in a feasible time. For an accelerated generation of CCG an extrapolation concept based on fatigue tests with cracked round bar (CRB) specimens was developed. In the present work this concept was applied to a common PE-pipe material to generate the material specific CCG data within a few weeks. To evaluate these data a fracture mechanics lifetime prediction of the CRB test was compared to results from static tests. With the integration of the data into a lifetime prediction model for pressurized pipes a simulation of a real pipe was possible.

HEATING AND PLASTICIZING THERMOPLASTICS WITH ULTRASOUND FOR MICRO INJECTION MOLDING
Yunior Hioe, Siva Movva, Dante Guerra, Zhi-Qi Cai, L. James. Lee, Jose M. Castro, May 2010

Ultrasonic plasticizing allows the melting of very small amounts of polymers for micro injection molding. The ability to plasticize polymers with ultrasound arises from the effect that they heat up under cyclic deformation due to inner and outer frictional losses. This paper presents investigations on the course of heating during plasticization. The heating rate as well as the corresponding process data of the ultrasonic equipment is analyzed in dependence on the parameter settings. Example micro parts being molded show the possibility to use ultrasonic plasticizing as a production technology.

EFFECT OF CARBON NANO FIBERS ON THE PERMEABILITY OF FIBER REINFORCED POLYMERIC NANOCOMPOSITES
Yunior Hioe , Siva Movva , Dante Guerra , Zhi-Qi Cai , L. James. Lee , Jose M. Castro, May 2010

One of the most attractive environmentally friendly energy generation methods is wind power. In order for this technology to compete favorably with the cost of traditional energy generation methods, the wingspan needs to be greatly increased from current dimensions. For this to occur, we need to take advantage of new material developments such as nano-composites.In order to manufacture such large parts, we need to understand factors affecting flow. In the case of flow through porous media, the material properties are permeability and viscosity. In this work we present preliminary results on the effect of carbon nano fibers on permeability.

SIMULATING THE DEFORMATION BEHAVIOR OF THERMOPLASTIC PARTS UNDER THERMAL AND MECHANICAL LOADS
Yunior Hioe, Keh-Chyou Chang, Maria G. Villarreal, Jose M. Castro, May 2010

During service, thermoplastic parts are often subject to a combination of thermal and mechanical loads. Especially the temperature has a great influence on the stiffness and the specific volume. Consequently the thermal exposure has to be considered during the design process of thermoplastic parts. This paper describes the modeling of the temperature-dependent viscoelastic material behavior. Because the determination of the required thermal and mechanical properties is cost- and time-intensive, a procedure is elaborated to depict the temperature-dependent long-term behavior on basis of short-time tensile tests. Finally the model is evaluated in a comparison with experimental results.

PREDICTING THE CYCLE TIME IN INJECTION MOLDING AS A FUNCTION OF THE FROZEN LAYER THICKNESS
Yunior Hioe , Keh-Chyou Chang , Maria G. Villarreal , Jose M. Castro, May 2010

In the current economic market, production efficiency is critical if manufacturers are to remain competitive. The largest part of the cycle in injection molding is the cooling time. Thus for injection molders, to be successful, it is extremely important that they minimize this part of the process without adversely affecting part quality. Predicting the minimum safe cycle time in injection molding is complicated by the cyclic nature of the process. The mold thermal state changes with continuous molding until a quasi steady state is achieved.In this work, we evaluate the minimum frozen layer thickness required before the part can be demolded and how the growth of this frozen layer is affected as the mold thermal state changes with continuous molding cycles. Experiments are used to relate the minimum frozen layer thickness to dimensional stability and to select an ejection criterion in order to obtain a minimum safe cooling time

A STUDY ON MATERIAL DISTRIBUTION AND MECHANICAL PROPERTIES IN CO-INJECTION MOLDING
Yottha Srithep , Bob Miller , Rachmat Mulyana Maria G. Villarreal , Jose M. Castro, May 2010

In the co-injection molding process, sometimesreferred to as sandwich molding, two different polymermelts are either simultaneously or sequentially injectedinto a mold to form a part with a skin/core structure. Coinjectionmolding offers the flexibility of using the bestproperties of each material to reduce material cost andpart weight. Particularly, it allows, the use of recycledmaterial in the core without an adverse effect on surfacequality. The properties of a co-injection molded productdepend on the individual properties of the skin and corelayers, and the skin/core volume ratio. This paper presentsa study of the effect of molding parameters on materialdistribution and mechanical properties of co-injectionmolded plates. Two virgin materials were triedpolypropylene (PP), and thermoplastic polyolefin (TPO)as well as grinded TPO from plastic bumpers.

MODELLING THE STRUCTURAL PERFORMANCE OF STRETCH-BLOW MOULDED PET BOTTLES
Walter Michaeli, Thorsten Leopold, May 2010

The mechanical properties of PET bottles are significantly affected by the process. In order to precisely model the structural performance of these bottles, the wall thickness and the process dependent material properties have to be considered. This paper describes an approach to combine the structural analysis and the process simulation. The wall thickness distribution and the local stretch ratios of the blown bottle are calculated by a process simulation and are then transferred to the structural analysis. Thereby, the stretch ratios are correlated with stretch ratio dependent material properties. In cooperation with Nestl?? Waters M.T., Vittel, France, the approach is applied on an empty and filled 0.5 litre PET bottle. The investigations point out that the accuracy of the structural analysis is significantly improved by applying the integrative approach.







SPE-Inspiring Plastics Professionals

© 2024 SPE-Inspiring Plastics Professionals.
All rights reserved.

84 countries and 60k+ stakeholders strong, SPE unites plastics professionals worldwide – helping them succeed and strengthening their skills through networking, events, training, and knowledge sharing.

No matter where you work in the plastics industry value chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor what your background is, education, gender, culture or age-we are here to serve you.

Our members needs are our passion. We work hard so that we can ensure that everyone has the tools necessary to meet her or his personal & professional goals.

Contact Us | Sitemap | Data Privacy & Terms of Use

Links

Locations

SPE US Office
83 Wooster Heights Road, Suite 125
Danbury, CT 06810
P +1 203.740.5400

SPE Australia/New Zealand
More Information

SPE Europe
Serskampsteenweg 135A
9230 Wetteren, Belgium
P +32 498 85 07 32

SPE India
More Information

SPE Middle East
More Information

3Dnatives Europe
157 Boulevard Macdonald
75017, Paris, France
More Information

Powered By SPE

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals

SPE ImplementAM

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals




spe2018logov4.png
  Welcome Page

How to reference articles from the SPE Library:

Any article that is cited in another manuscript or other work is required to use the correct reference style. Below is an example of the reference style for SPE articles:

Brown, H. L. and Jones, D. H. 2016, May.
"Insert title of paper here in quotes,"
ANTEC 2016 - Indianapolis, Indiana, USA May 23-25, 2016. [On-line].
Society of Plastics Engineers
Available: www.4spe.org.

Note: if there are more than three authors you may use the first author's name and et al. EG Brown, H. L. et al.

If you need help with citations, visit www.citationmachine.net