SPE Library


The SPE Library contains thousands of papers, presentations, journal briefs and recorded webinars from the best minds in the Plastics Industry. Spanning almost two decades, this collection of published research and development work in polymer science and plastics technology is a wealth of knowledge and information for anyone involved in plastics.

The SPE Library is just one of the great benefits of being an SPE member! Are you taking advantage of all of your SPE Benefits?

Not an SPE member? Join today!

Use % to separate multiple keywords. 


Search SPE Library
    
    




Sort By:  Date Added   Publication Date   Title   Author

Conference Proceedings

Application of the Crack Layer Model for Understanding of the Correlation between Lifetime and Creep Behavior in Polyethylene
J. Fan, D. Chen, Y. Shulkin, A. Chudnovsky, N. Jivraj, K. Sehanobish, May 2000

A closely coupled system comprising of a crack and a process zone (PZ), i.e., a domain of crazed material ahead of the crack, commonly observed in polyethylenes (PEs), constitutes the crack layer (CL). According to the CL theory, slow crack growth in polyethylenes is largely a result of degradation of the process zone material. The CL theory has been applied to model some features of slow crack growth in PE, such as the discontinuous manner of the process, the widely reported specifics of fracture surface morphology, the stress and temperature dependence of lifetime, as well as the crack speed-stress intensity factor (SIF) relation. In the present work, a simplified version of the CL theory is employed to explain and generalize the correlation between the lifetime of PE pipes in brittle mode fracture and the so-called Creep Rate Deceleration Factor (CRDF) of drawn PE.

Ductile Failure and Delayed Necking in Polyethylene
W. Zhou, D. Chen, Y. Shulkin, A. Chudnovsky, N. Jivraj, K. Sehanobish, S. Wu, May 2000

Analysis of polyethylene (PE) pipes ductile failure (ballooning) suggests that it is directly related to the delayed necking phenomena and time to ductile failure of PE pipe can be evaluated as the time to delayed necking. The necking in polyethylene (PE) is studied under displacement control (ramp test) and load control (creep) conditions. In ramp tests the dependence of the yielding and drawing stresses on strain rate are established using specimens of a European PE 100 pipe grade HDPE, It is shown that both stresses decrease with decrease of strain rate and approach a common value, the characteristic stress. In creep tests of the above material, the relation of time-to-necking vs. applied stress is obtained. It is proposed to employ the testing procedure on tensile specimens for estimation of time-to-ductile failure in PE pipes. The characteristic stress is suggested to be an indicator of the ductile-to-brittle transition in failure mechanism.

A Practical Fiber Optic Sensor to Monitor Resin Cure and Interphase Formation
Joseph L. Lenhart, John H. van Zanten, Joy P. Dunkers, Richard S. Parnas, May 2000

A fluorescent probe, covalently grafted to glass, is used to study the glass / resin interphase region near the surface. A shift in the fluorescence maximum during resin cure can be monitored when the grafted dye is immersed in epoxy. The position of the fluorescence maximum is used to detect a difference between the bulk resin and interphase. To make the technique practical as a cure sensor, the dye can be grafted to a glass fiber optic.

Structural Order and Charge Transport in Polymers
Arthur J. Epstein, Vladimir N. Prigodin, May 2000

It has long been known that polymers have a structural order intermediate between that of insulators and that of amorphous materials. We show how this intermediate type of order leads to anomalous charge conduction properties for insulating, semiconducting, and metallic polymers. Concepts such as fractal dimensionality and mesoscopic order are introduced and their unusual predictions for variation of conductivity and dielectric constant with temperature and frequency are presented. A comparison with experimental results for undoped and doped polymers is presented.

An Analysis of the Heat Exchange Phenomena in Heavy Gauge Thermoforming-Part I
Donald Hylton, Tameka Spence, Errol Sampson, Kyra Dorsey, Reginald Parker, Thorsten Emyael, May 2000

A comprehensive analysis of the heat exchanges between an instrumented Aluminum mold and various thermoforming materials were made during controlled heavy gauge production trials. Five materials Impact Polystyrene, High Density Polyethylene, PETG, ABS and Impact Polypropylene Copolymer were evaluated. Heat flux was calculated. Experimental variables were quiescent and circulated ambient air, mold and coolant temperatures.

Durability Study of Conductive Copper Traces within Polyimide Based Substrates
Elena Martynenko, Wen Zhou, Alexander Chudnovsky, Ron Li, Larry Poglitsch, May 2000

Flexible printed circuitry (FPC) is a patterned array of conductors supported by a flexible dielectric film made of high strength polymer material such as polyimide. The polyimide core is the premier dynamic structure membrane with an extraordinary ability to withstand continuous. Flexing for hundreds of millions of flexing cycles, fatigue performance and reliability are paramount issues in the design and manufacturing of FPC. In the composite structure, the conductive layers are more vulnerable to failure due to their lower flexibility compared to polyimide film. This paper is focused on the reliability assessment of FPC based on the high cycle fatigue resistance. Fatigue resistance of various material systems has been analyzed as a function of temperature and frequency. The fatigue characteristics of selected material systems are summarized in the form of S-N diagrams. Failure mechanism observations are discussed and complete fracture analysis is presented. In various FPC systems, it has been found that the changes take place in FPC failure mechanisms from well developed and aligned through the width cracks at low temperature to an array of multiple cracks with random sizes and locations at high temperature. Comparative analysis of various material systems based on fatigue performance is presented.

True Stress-Strain-Temperature Diagrams of Polyolefins and Their Application in Acceleration Tests for Lifetime Prediction
J. Liu, Z. Zhou, X. Niu, A. Chudnovsky, May 2000

True stress - strain - temperature (TSST) diagrams are being used as a tool for characterizing thermo-mechanical behavior of polymers. TSST diagrams are developed for materials that undergo necking by consideration of a material point perspective. In the present work TSST diagrams of three polyolefin types, Polyethylene, PE, polypropylene, PP, and polybutylene, PB, are constructed and their relevance to accelerated lifetime testing discussed. It is found, in contrast to PE and PP, the changes in PB deformation behavior raises the issue of validity of lifetime predictions of PB at temperatures below 70°C based on testing at temperatures above 70°C.

The Effect of Chemical Degradation on Physical Properties and Fracture Behavior of Poly(ethylene-co-carbon monoxide) and Poly(1-butene)
X. Niu, E. Martynenko, A. Chudnovsky, S.H. Patel, S.S. Stivala, May 2000

Chemical degradation is one of the dominant mechanisms of aging in polymers. To prevent a premature catastrophic failure of polymers in durable applications, an understanding of the causes and kinetics of chemical degradation are required. UV accelerated oxidation has been applied in this work to study the effect of oxidative degradation on physical and mechanical properties, such as crystallinity, density, toughness and deformability of unpigmented, unstablelized Poly (ethylene-co-carbon monoxide), ECO, and Poly (1-butene), PB. The correlations between the variation of physical, mechanical properties, and reduction of molecular weight are reported. The effect of oxidative degradation on fatigue crack growth rate and build-up of residual stresses due to densification is also addressed.

Notch Sensitivity of Pipe Grade Polyethylene and Polybutylene
X. Niu, D. Chen, W. Zhou, A Chudnovsky, N. Jivraj, May 2000

To characterize the notch sensitivity for short-term (e.g. notch sensitivity under dynamic impact conditions, sensitivity to failure under rapid crack propagation conditions) and long-term (e.g. slow crack growth resistance, pipe lifetime under creep conditions) strength of thermoplastics, the ratio of the energy-to-break in tensile impact test for notched and unnotched specimens (short term notch sensitivity factor) and the similar ratio for the time-to-failure in tension creep test (long term notch sensitivity factor) are introduced. The limits of these ratios as the notch length approaches zero are called the notch sensitivity factors. The test procedure is developed and applied to determine the factors for one pipe grade polyethylene (PE) and one pipe grade polybutylene (PB). The results indicate that both materials show short term notch sensitivity, and that PB shows very high long term notch sensitivity in contrast to PE.

Predicting Thermal Degradation of PVC Compounds during Injection Molding
Jose L. Garcia, Kurt W. Koelling, James W. Summers, May 2000

The goal of this study was to determine the degree of degradation during PVC injection molding and to compare the results with a computational model. It was found that a good agreement between experimental and computational results was obtained only if the reaction was assumed to be more thermally sensitive than found in literature. The results from this study show that during injection the activation energy for degradation was 65 kcal/mol, compared to 17-30 kcal/mol found in literature for quiescent systems.

3-D Simulation of Thin-Wall Injection Molded Part by CAE
Sooyoung Cha, Francis S. Lai, May 2000

This work reports the results of CAE simulation of thin-wall injection molded part by 3D TIMON. The model used in this simulation was a speaker grille that has thin wall and many tiny openings (net) for sound through them. These openings cause unfavorable weld lines. Effects on weld lines and effects of the number and location of gates were discussed.

An Investigation of the Rotomoldability of New Generation Polyethylene
E.Takács, M. Kontopoulou, D. Annechini, J. Vlachopoulos, May 2000

Rotational molding is a fast growing process with a constant demand for new materials. As a result of the recent advances in the metallocene single site catalyst systems, a new generation of polyethylenes with unique molecular structure has been developed. The present study compares the rotomolding characteristics of polyethylenes made by metallocene and conventional catalysts.

Profile Extrusion of Highly Filled Recycled HDPE
Zach Charlton, John Vlachopoulos, Dedo Suwanda, May 2000

Recycled high density polyethylene (HDPE) filled with up to 70 wt% rice hulls was compounded and tested for dynamic shear properties on a parallel plate rheometer. A 60 wt% formulation was extruded through two profile dies. Extrudate tearing occurred at all throughputs. The magnitude of the tearing increased with increasing throughput and decreasing land temperature. Observations, 2-dimensional finite element and fully 3- dimensional finite volume simulation suggest the tears are most severe where the wall shear stress is relatively lower.

An Anamoly in the Lifetime-Temperature Relation of a Polybutylene for Pipe Applications
X. Niu, W. Zhou, Y. Shulkin, A. Chudnovsky, N. Jivraj, May 2000

A comparative analysis of polyethylene (PE) and polybutylene (PB) tensile behavior at various temperatures is reported. It is noted that PB exhibits different tensile behavior below and above 70 °C (transition temperature). This is in contrast with PE that does not change its tensile behavior over the entire temperature range considered. PB also exhibits different crack growth mechanisms at 110 °C (above the transition temperature) than that at 50 and 23 °C (below the transition temperature). The fatigue lifetime for PB at 110 °C is observed to be more than ten times the fatigue lifetime at 23 °C. Thus the commonly accepted opinion that temperature is always an accelerating factor of fracture process is not applicable for PB within the above range of temperatures. It is suggested that the observed anomaly in temperature acceleration of fracture in PB is related to the reported transition of tensile behavior around 70 °C

Synthesis and Elucidation of Behavior of Aromatic Fluoro-Polyimides
Shu-Chen Lin, Bang-Chein Ho, Long-Li Lai, Se-Tsun Hong, Kung-Lung Cheng, May 2000

This study demonstrated that a variety of fluoro-containing polyimides with hydroxyl groups, simply incorporated with a copolymerization of 2,2'-bis(3- amino-4-hydroxyphenyl)hexafluoropropane (BAHHF), 2,2'-bis(4-aminophenyl)hexafluoropropane (BAHF), and 2,2'-bis(1,3-dioxo-1H,3H-isobenzofuran-5-yl)hexa-fluoropropane (BIFHF), were responsible for the good solubility in organic polar solvents. These polyimides exhibited optically transparent at a wavelength of 365nm with respect to the UV-visible spectroscopic determination. Measurement of differential scanning calorimetry (DSC) and thermogravimetric analyzer (TGA) indicated that these polymers, having the glass transition temperatures (Tgs) varied from 306°C to 317°C, were quite thermally stable. In addition, the inherent viscosity as well as refractive index of the polymers was studied and potential applications of photoresists in terms of photosensitivity were also discussed.

A Fresh Approach of Modified Clays for Polymer/Clay Nanocomposites
Tsung-Yen Tsai, Chih-Lan Hwang, Shyh-Yang Lee, May 2000

Most nanocomposite materials are initially prepared by modifying the hydrophilic clay or hydrophobic clay. Related investigations emphasize the compatibility between clay and polymer, but overlook the factor of the monomer diffusing into the interlayer to proceed with polymerization. This treatment causes most of the polymer/clay nanocomposites being only the intercalated dispersion of clay instead of exfoliated dispersion in the substrate of polymers. Therefore, this study applies the catalyst after a unique polymerization process to make the stratiform inorganic mineral materials disperse proportionally in the polymer materials and form nanocomposites. Doing so significantly enhances the mechanical properties, thermal deformation temperature, and CO2 gas barrier of polymer/clay nanocomposites.

Conductive Thermoplastic Elastomers
Sam J. Dahman, Todd Holzbauer, Barry Nelson, May 2000

Thermoplastic elastomers are materials that combine the processing characteristics of thermoplastics with the physical properties of conventional thermoset rubbers. The combination has been sufficiently attractive that thermoplastic elastomers have become commercially successful. This success has led to their extension as specialty compounds for applications requiring increased electrical conductivity. In order to achieve desired conductivity, carbon and metal powders are typically employed. To a lesser degree, carbon and metal fibers are also utilized. New thermoplastic elastomer compounds have been recently developed that contain intrinsically conductive polymers. The properties of these novel materials are compared to conductive thermoplastic elastomers with traditional conductive additives.

Colorable Thermoplastic Compounds for Electrostatic Painting Applications
Barry Nelson, Sam J. Dahman, May 2000

The volume resistivity threshold for maximum paint transfer efficiency via electrostatically painting was determined to be in the range of 105 to 107 ohm-cm. Thermoplastic compounds have been developed for electrostatic painting which do not meet this threshold (greater than 107 ohm-cm) and still exhibit good transfer efficiencies without a conductive primer. Further, these compounds do not contain metal or carbon-based additives. As a result, they may be pigmented to any desired color. A comparison is made between electrostatically painted carbon based substrates and color-matched substrates. New options are now available for property selection while still retaining the economic benefits of electrostatic painting.

Impact Test with Flat-Ended Impactor for Protective Materials: Specimen Thickness Effect
Ho Sung Kim, Robert M. Shafig, May 2000

Thickness effect on impact parameters is studied and a model is developed for flat-ended drop weight impact testing of visco-elastic materials. The model represents a relationship of specimen thickness with impact force/stress and impact energy. A polymeric material, ethylene-vinyl-acetate (EVA), was used for experimental verification. Experimental results for a thickness range of 1 to 9 mm at impact energy levels of 0.42, 0.96 and 1.54 Joules have been found to be in good agreement with predictions based on the model.

Multi-Component Injection Molding-Part 1: Interface and Microstructure Development
K.P. Palluch, A.I. Isayev, May 2000

The purpose of this paper is the physical modeling and numerical simulation of the interface and microstructure development during the multi-component injection molding process. A software has been developed based on the control volume finite element method to calculate the transient non-isothermal multi-phase flow of viscoelastic polymer melts and to predict the stress-induced crystallization within the semi-crystalline polymers. Based on the developed simulation software material selection and process optimization becomes possible.







SPE-Inspiring Plastics Professionals

© 2024 SPE-Inspiring Plastics Professionals.
All rights reserved.

84 countries and 60k+ stakeholders strong, SPE unites plastics professionals worldwide – helping them succeed and strengthening their skills through networking, events, training, and knowledge sharing.

No matter where you work in the plastics industry value chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor what your background is, education, gender, culture or age-we are here to serve you.

Our members needs are our passion. We work hard so that we can ensure that everyone has the tools necessary to meet her or his personal & professional goals.

Contact Us | Sitemap | Data Privacy & Terms of Use

Links

Locations

SPE US Office
83 Wooster Heights Road, Suite 125
Danbury, CT 06810
P +1 203.740.5400

SPE Australia/New Zealand
More Information

SPE Europe
Serskampsteenweg 135A
9230 Wetteren, Belgium
P +32 498 85 07 32

SPE India
More Information

SPE Middle East
More Information

3Dnatives Europe
157 Boulevard Macdonald
75017, Paris, France
More Information

Powered By SPE

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals

SPE ImplementAM

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals




spe2018logov4.png
  Welcome Page

How to reference articles from the SPE Library:

Any article that is cited in another manuscript or other work is required to use the correct reference style. Below is an example of the reference style for SPE articles:

Brown, H. L. and Jones, D. H. 2016, May.
"Insert title of paper here in quotes,"
ANTEC 2016 - Indianapolis, Indiana, USA May 23-25, 2016. [On-line].
Society of Plastics Engineers
Available: www.4spe.org.

Note: if there are more than three authors you may use the first author's name and et al. EG Brown, H. L. et al.

If you need help with citations, visit www.citationmachine.net