SPE Library


The SPE Library contains thousands of papers, presentations, journal briefs and recorded webinars from the best minds in the Plastics Industry. Spanning almost two decades, this collection of published research and development work in polymer science and plastics technology is a wealth of knowledge and information for anyone involved in plastics.

The SPE Library is just one of the great benefits of being an SPE member! Are you taking advantage of all of your SPE Benefits?

Not an SPE member? Join today!

Use % to separate multiple keywords. 


Search SPE Library
    
    




Sort By:  Date Added   Publication Date   Title   Author

Conference Proceedings

Open-Cell Foaming Of Pp/Ptfe Fibrillated Composites
Yu Guang Chen, May 2018

In the study. PP/PTFE composites with different degree of fibrillation were prepared. Crystallization and rheology behavior was investigated. The presence of PTFE fiber enhanced the kinetics of isothermal crystallization of PP. The second modulus plateau at the low ω and a tan δ peak indicates the existence of a three dimensional networks. Extrusion foaming results shows that addition of PTFE increase a 2 orders increase in cell dencity and 10-fold decrease in expansion ratio due to addition of PTFE compared to that of PP. With PTFE nanofiber, open-cell content of the composites was increased.

Role Of Functionalization Of Nanoclay Particles On Diffusion Properties Of Commercial Gasoline Through Polymer Membranes
James Sloan, May 2018

In this work, we consider the effect of the addition of functionalized clay particles to a polyether based polyurethane that is a candidate to be used as for flexible storage containment for a variety military fuels. We have synthesized urethanes and fully incorporated functionalized layered silicate inorganic nanoclay with concentrations varying from 0% to 20% by weight. The clays were functionalized with polar hydroxyl groups (-OH) and nonpolar long alkyl chains (-CH3-(CH2)14-CH3) and we evaluated the transport properties of military grade fuels. We found the addition of the nonpolar alkyl functionalized nanoparticles, actually increased both the transport rate and the fuel solubility of the resultant composite.

Polyetheretherketone (PEEK) Exposure To ZnBr2 Completion Fluids At High Temperatures And Pressures: Identification And Quantification Of Small Molecular Decomposition Products
Joseph Baker, May 2018

Polyetheretherketone (PEEK) polymers are utilized in applications of extreme service environments in the oil and gas industry. However, their outstanding physical properties diminish after long-term exposure to highly concentrated ZnBr2 completion fluids under the extreme downhole conditions. PEEK is an insoluble polymer at room temperature and sparingly soluble at elevated temperatures in only a few special solvent mixtures. The research presented in this contribution is focused on detailed analytical studies to elucidate the molecular mechanisms that lead to the decomposition pathways during the degradation processes. This investigation includes determining the factors that hasten the polymer decomposition. Completion fluids composed of high concentrations of ZnBr2 and/or CaBr2 were applied to the long-term studies of the polymer at the continuous use temperature of 260 °C at a high pressure of 20 bar.The chemical changes of PEEK under the drilling conditions are visually obvious only when ZnBr2 completion fluids are applied. Since the PEEK polymer cannot be solubilized (which is needed for many analytical high resolution measurements) we chose to study the small molecules released during the PEEK treatment. Identification and quantification of the small molecules released into the completion fluid during the PEEK degradation could be achieved with solution NMR and the use of a calibrated standard. The identification was confirmed with other analytical techniques like mass spectrometry. Mechanistic studies based on the identification of the small molecules reveal the simultaneous occurrence of several decomposition pathways. For example, bromination by the ZnBr2 in the completion fluids, radical based decompositions, and hydrolysis under acidic conditions. The dominant reaction taking place in the PEEK polymer is C-C bond cleavage at the ketone group. The smaller molecules produced from this initial cleavage at the ketone are then degraded in a secondary process, for example, by hydrolysis. Finally, the degradation mechanisms found for PEEK were also established for another polymer with similar composition. Studying the chemically related polyetherketoneketone (PEKK) polymers in the described standardized manner, after exposure to identical conditions, led to the same decomposition pathways. Therefore, it is expected that future investigations of other polyaryletherketone (PAEK) polymers will reveal the same general degradation mechanisms as described for PEEK and PEKK in this contribution.

Core/Shell Structure Of Electrospun Polycarbonate Nanofibers
Yiyang Xu, May 2018

Internal structure is key to tailoring the performance of electrospun (ES) nanofibers. However, it still remains very challenging to characterize the structures inside ES fibers. In this study, ES polycarbonate (PC) nanofibers were successfully cut open along and across the fiber axis by embedding. These sections exhibited a clear core/shell-like structure, where the shell layer remained nearly con¬stant (50 nm or so) with increased fiber diameter, while the core layer showed a linear increase. The reason for this is discussed herein, and a model describing the variation of the core/shell layer thickness is proposed. This model has the potential to enable the production of nano¬fibers with superior properties.

Crystallization Behavior Of Sheared Polyamide 66
Anne Gohn, May 2018

The application of fast scanning chip calorimetry (FSC) for analysis of sheared polyamide 66 (PA 66) provided quantitative insight of the effect of shear flow and flow-induced formation of crystallization precursors/nuclei on the subsequent crystallization in a wide range of temperatures. In the high-temperature, heterogeneous-nucleation range, there is a direct relationship between the amount of specific work supplied to the melt and the acceleration of crystallization, presumably due in part to increased nucleation density of the sheared samples. This information is directly applicable to polymer engineering applications where the formation of crystalline domains during processing often occurs at rapid-cooling conditions. Analysis of the structure at the micrometer-length scale of sheared PA 66 by polarized-light optical microscopy (POM) revealed large shish-kebab structures.

High Performance Fillers – Wide Range Of Improvement With Small Particles!
Péter Sebö, May 2018

The requirements of new and modern technical plastic are changing constantly. In most cases the required property profiles cannot be met by the polymers alone. For this reason, they are modified by a broad range of filling and reinforcing materials. High performance, functional fillers on the basis of needle-shaped wollastonite, platelet-shaped mica and platelet-shaped kaolin play a central role in this for many years. The mechanical properties are often modified with glass fibres. As fibreglass-reinforced moulding compounds are clearly anisotropic on account of the alignment of the fibres in the molten compound, they are not equally suitable for all components. The use of mineral fillers offers an interesting spectrum of new possibilities on account of their different specific features, such as morphology, hardness or surface condition. Furthermore, mineral fillers can be used also as nucleating agents or as supporter to enhance the flame resistance.Lately, new functionalities are required in addition to the traditional ones. Thermal conductivity of plastics is one of these new requirements: Electrical components with high energy density require an efficient dissipation of the heat incurred while maintaining the electrical insulation performance of the plastic material used. Thermal conductive plastics create a whole series of new kinds of applications with important advantages like straightforward mass production of complex components, e.g. injection molding or lightweight production. All important issues especially if we consider new applications in the E-Mobility area.The talk should give a general overview about fillers used in various polymers, with some examples in thermoplastics and thermoset resins, considering the topics mechanics, shrinkage and other specific modifications like increasing of the thermal conductivity and enhancement of flame resistance. As the event is some time away, we expect a quite broader range of results to be included in the lecture.

Smart Light And Energy Management With Acrylic Glass!
Péter Sebö, May 2018

Light is responsible for our overall well-being and is a valuable source of energy for every person to an unlimited degree. Therefore, in modern architecture large transparent glass facades are used. In winter, the incident sunlight can so be used optimally. In summer, the sun often provides more heat than desired with negative effect on the indoor climate. During building design, the summer heat protection is therefore of central importance. The key challenge is to make best use of solar energy, while preventing indoor overheating.Conventional shading systems, whether internal or external, need complex assembly services, are expensive and often require intensive maintenance. Acrylic glass (PMMA), an affordable alternative to mineral glass, is widely used in construction and other applications. Common products in construction are especially solid sheets, multi-wall sheets and corrugated sheets.HPF The Mineral Engineers, a division of Quarzwerke Group, accepted the challenge and developed a whole new thermotrop additive. This new product was officially presented on the K-Show 2016 in Düsseldorf. This product is a masterbatch or an additive powder designed for acrylic glass. It is either homogeneously mixed with impact modified PMMA compounds or fed via dosing device during processing (extrusion or injection process). With this additive functionalized acrylic glass changes its transmittance of light and solar radiation as a function of the ambient temperature. When the temperature is increasing, on hot summer days for example, it switches from transparent state into a milky white state. This effect is adaptive and reversible, so the use of daylight and solar energy can be controlled.This presentation will show and explain the function and the effect of this new and innovative masterbatch and will point out how this new HPF product can solve some of the issues in the application area of daylight systems. The whole content is supported by investigation results and some application examples.

Stress-Induced Crystallization In Polypropylene
pierre donaldson, May 2018

Stress-induced crystallization in PolypropylenePierre Donaldson and Thoi Ho (Flint Hills Resources)Abstract:Conventional method to induce crystallization in Polypropylene is the use of external nucleators such as Sodium Benzoate and other organic salts. Several recent studies have also shown the phenomenon of flow-induced crystallization in absence of an external nucleator. Extensional rheometers and high intensity mixers have been used to produce such flow-induced crystallization. We have found that an increase in crystallization temperature for Polypropylene can also be achieved by extrusion through twin-screw extruder. Effect of such nucleation on subsequent fabrication process, e.g. injection molding and resulting mechanical properties were studied. WAXS studies showed 10% increase in crystallinity. In comparison, external nucleation shows and increase of 45% crystallinity. Increased in crystallinity was due to increase in  form. The effectiveness of different methods to induce crystallization will also be discussed.

New Insights from Tailored Dispersion of Multi-Walled Carbon Nanotubes Through the Optimization of Melt Mixing Parameters During Production of Polypropylene-Based Nanocomposites
Valérie LISON, May 2018

One major problematic to solve with multi-walled carbon nanotubes (MWCNTs) is the control of their process of dispersion in order to avoid agglomerates. This challenge is even more difficult if the host matrix is non-polar. This work focuses on the study of processing parameters to efficiently disperse MWCNTs in polypropylene with two different approaches: direct compounding and masterbatch dilution. The relationship of achieved results of dispersion and electrical performances with the variation of processing parameters will be determined through measured electrical resistivity, agglomerate area ratio and specific mechanical energy calculations.

Acrylonitrile Butadiene Styrene (Abs)/Mica Composites: Preparation And Characterization
Mohammed Alghamdi, May 2018

Composite materials are made by combining two or more materials. In terms of achieving new and unique properties composite materials are one of the commonly use method. Polymeric composite materials consist of polymer matrix and fillers. Here the selected polymer is Acrylonitrile Butadiene Styrene (ABS) as the matrix and mica as the filler. ABS is one of the versatile plastics with high melting point, hardness and strength. ABS is used in making car bumpers, motorcycle helmets, musical instruments, golf clubs, and more. Mica is unique plastic filler in terms of mechanical, thermal, chemical and electrical properties. Because of these good properties, mica is widely used as an additive mixed with nearly all types of plastics such as PP, HDPE, PET, etc. Mixing ABS with mica will prepare products which are better in quality and higher in properties of the existing one which is made with ABS alone. ABS plastics and mica filler with different concentrations were mixed by using an internal mixer. The mixed materials are shaped into standard specimens through injection molding machine. The prepared composites were tested for structural, mechanical and thermal properties.

Statistical Optimization Of Additives For Glass Filled Polypropylene Stabilization
Syed Hassan, May 2018

This paper attempts to optimize the additive package for stabilization of glass filled polypropylene by a comprehensive design of experiment and subsequent regression analysis. Thermoplastic materials are processed at high temperature and high shear. A product’s lifetime exposure to heat, sun light, and humidity cause severe degradation in physical performance and discoloration. Suitable additives, such as heat stabilizers, antioxidants, processing aid and light stabilizers are added to improve the long-term performance. In this study, principles of mixture design of experiment and subsequent statistical optimization of additive packages for a fiber glass filled polypropylene (PP) has been performed using Minitab® to analyze the results. Responses are considered individually to understand the synergism and antagonism that exist within additives. Two anti-oxidants (AOs), two ultraviolet light (UV) stabilizers, an acid neutralizer (AN) and lubricant (L) were evaluated. Combinations of anti-oxidants (AOs) and UV stabilizers support the retention of physical properties and help reduce yellowness after hot air ageing at 150oC up to 1000 hours. The objective of this study is to analyze the properties of tensile stress at yield, tensile strain at yield, tensile modulus, notched Charpy and yellowness index. This study also evaluates the effects of projected component levels to achieve target physical properties.

A New Carbon Black For High Jetness And Easy Dispersion
Marc Delvaux, May 2018

With standard Carbon Black, it is difficult to produce compounds with both very high jetness and outstanding mechanical properties at the same time. Therefore, in a first step, we worked on our mechanical dispersion process and achieved strong improvements on jetness and mechanical properties. In a second step, we optimized our particle's morphology to get even better color and dispersion, resulting in further improved results. Summarized, by combining process and particle innovations, mechanical performance can be increased by up to 54% at same jetness level. Depending on the application's needs, jetness can also be increased by up to 65%. Balancing jetness and mechanicals to an optimal combination is possible by adjusting the carbon black loading.

Particle Additives For Simultaneous Enhancement Of Degradation And Toughening In Poly(Lactic Acid) For Additive Manufacturing
Caroline Multari, May 2018

Our goal is to simultaneously improve fracture toughness and biodegradation behavior of poly(lactic acid) (PLA) using the same additive. Our approach explores the use of encapsulation on a series of degradation-promoting additives so that they may survive the melt extrusion process while limiting any breakdown of the matrix. In addition to promoting biodegradation such encapsulated particles are designed to enhance toughening. Such dual use particles have the potential to broaden the uses of PLA. In this work, particle properties, structure and dispersion in PLA are examined and the accompanying tensile behavior investigated. Particles with polysaccharide or protein shells with oil cores were able to be produced and dispersed within the PLA matrix with minimal leakage of the active material during extrusion to 3D printer filament. The elongation at break and yield strength were improved over neat PLA.

A Characterization Of Soy Additives In Biobased Polyethylene Films
Peter Perez, May 2018

Four different soy additives were compounded into Linear Low Density Polyethylene (LLDPE). The four different additives were compounded and pelletized by FKuR. After a film was produced for each of the four batches, the mechanical, barrier, and thermal properties of each batch was characterized and compared to a control sample. The use of soy in polymeric films improved mechanical properties in LLDPE, reduced the cost and amount of plastic used, and improved water vapor barrier of the polymer. The modulus of each film increased with the use of filler. However, the ultimate extension and ultimate tensile strength decreased in the samples containing soy fillers. The films showed increased crystallinity in samples containing soy fillers. Additionally, thermal analysis indicated large amounts of weight loss in the soy loaded films when heated.

Mechanical Reinforcement With Cellulose Filaments
Helen Lentzakis, May 2018

Kruger Biomaterials proprietary cellulose FiloCell™ is obtained from peeling the filaments from wood fibres using a mechanical process that uses no chemicals or enzymes. Since the peeling is gentle, very thin filaments are obtained while the original length is preserved. The filaments are further surface treated without modification of the chemical structure in order to prevent hornification (agglomeration due to strong hydrogen bonds) and to produce 99.7% dried, re-dispersible filaments. The resulting filaments are renewable, non-toxic, have high surface area, high aspect ratio, mechanical strength and low density. Given these properties, cellulose filaments are a unique multifunctional lightweight filler which can be added to polymer resins as a reinforcing agent and can potentially replace glass fibers.In this work, cellulose filaments are melt-blended into thermoplastics LDPE, Nylon 6 and TPU. Cellulose filaments are shown to effectively increase the Young’s modulus and the strength of all polymer matrices. The mechanical enhancement is increased with loading level of cellulose filaments. It is shown that no compatibilizing agent is needed in order to improve the interaction between the hydrophilic filler and the hydrophobic matrix. Moreover, although one drawback of natural fiber is its thermal degradation at high processing temperature, we managed to successfully compound our cellulose filaments with nylon 6 which has a processing temperature of 230˚C. In LDPE resin, at the same weight, cellulose filaments outperform glass fibers in both tensile strength and tensile modulus. In comparison with other natural fibers, cellulose filaments have the advantage of higher mechanical performance and lower water absorption.

Modeling Doming Deflection Of Caps & Closures With Finite Element Method
Wenbo Xu, May 2018

As part of an effort to develop light weight closures for carbonated soft drinks (CSD), a finite element model has been developed to understand the impact of resin properties and closure design on the end product performance. Phase I of the model development is to understand the deformation mechanics as a precursor to light-weighting effort. The model simulates typical loading conditions in CSD closures and predicts the resultant stress & strain in the closure. The current study focuses on the doming deflection of CSD closures. Preliminary results are in excellent agreement with the experimental results. The FEA results and experimental data suggest that viscoelasticity of the resin i.e. high density polyethylene (HDPE) plays an important role in determining the long term performance of CSD closures. The current report introduces the key techniques applied in the model development and summarizes the results of the model and the validation experiments.

Yes, You Can Break Certain Design Rules And Still Have A Successful Product - A Logical Look At The Implications
VIKRAM BHARGAVA, May 2018

Plastic parts are a lot less forgiving than their metal counterparts on the strict adherence to established design rules for meeting short and long-term performance requirements.These requirements can broadly be broken into:CosmeticsImpact strengthToughnessChemical resistanceTolerance precisionHigh and low-temperature use and cyclingOutdoor exposureCostThus, a much more rigorous adherence to the rules may be required for a high-end handheld, mission-critical computing and communicating device in a hospital that needs to be cosmetically appealing, have very high impact strength, good chemical resistance and high and low-temperature resistance. A failure due to design errors in a simple drop on a device like this in the hand of a medical technician may cause death!On the other hand, a minor blemish or crack in a lightweight remote control for a low-end TV may not nearly be as catastrophic.The base cover of an inexpensive, lightweight inkjet printer may be even more forgiving.To be realistic, design rules may have to be broken based on the end use and other conflicting product requirements.This paper will provide a logical guide on making exceptions to the design rules based on multiple case studies.It will also introduce a design checking software, DFMPro where the rigorousness of the design rules can be “dialed” in based on the specific product requirements

Influence Of Thermal Treatment On The Mechanical Properties Of Thermoplastic Composites Obtained By Large-Format 3D Printing Process
Miguel A. Hidalgo Salazar, May 2018

The process of large-format 3D printing is gaining popularity because larger pieces can be obtained in comparison to the conventional 3D printing process, being a promising alternative for products design and development due to the incorporation of innovative raw materials as biocomposites for large scale manufacturing. In this work, tensile test specimens were 3D-printed by large-format process and different commercial material used in conventional 3D printing. As-printed specimens and annealed specimens were subjected to tensile testing. DSC and TGA were used to optimize the printing process and annealing conditions of the samples. It was observed that the annealing process had a different effects on the properties depending on the materials studied.

Design For Manufacturability – 3D-CAD Design Methodology For Spiral Milled Polymer Processing Tools
Phil Hungenberg, May 2018

3D-CAD systems show limitations with regard to the design process of helical milled parts. This paper introduces a surface based design methodology, which enables the designer to bypass these restrictions. Additionally, an approach to facilitate an early knowledge transfer between production planning and design department is shown and implemented through the use of knowledge based engineering methods. Thereby a virtual product model is generated that represents the exact work piece geometry and contains specific manufacturing information while meeting the functional requirements of spiral mandrel dies and thus impacting the whole process chain positively. Furthermore, a method to optimize certain sections of the flow channel which show subpar flow properties is introduced.

Polypropylene/ Polyvinylidene fluoride Fibrous Water/Fuel Filters Produced by a Unique Multilayer Co-Extrusion Process
Cong Zhang, May 2018

A unique co-extrusion and multiplication technique combined with a water jet fiber separation process was utilized to manufacture nano/micro-fibrous filters for applications in fuel/water separation. Hydrophobic polypropylene/polyvinylidene fluoride (PP/PVDF) dual-component fibrous filters were produced having different fiber size. The filter pore size was found to decrease with decreasing fiber size and the surface area was found to increase with increasing fiber size. The filter having the smallest pore size exhibits the highest filtration efficiency as 93.5%. Corona treatment was conducted on the PP/PVDF fibrous filter to evaluate hydrophilicity influence on water separation. It is found that moderate hydrophilicity improves the water separation efficiency.







SPE-Inspiring Plastics Professionals

© 2024 SPE-Inspiring Plastics Professionals.
All rights reserved.

84 countries and 60k+ stakeholders strong, SPE unites plastics professionals worldwide – helping them succeed and strengthening their skills through networking, events, training, and knowledge sharing.

No matter where you work in the plastics industry value chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor what your background is, education, gender, culture or age-we are here to serve you.

Our members needs are our passion. We work hard so that we can ensure that everyone has the tools necessary to meet her or his personal & professional goals.

Contact Us | Sitemap | Data Privacy & Terms of Use

Links

Locations

SPE US Office
83 Wooster Heights Road, Suite 125
Danbury, CT 06810
P +1 203.740.5400

SPE Australia/New Zealand
More Information

SPE Europe
Serskampsteenweg 135A
9230 Wetteren, Belgium
P +32 498 85 07 32

SPE India
More Information

SPE Middle East
More Information

3Dnatives Europe
157 Boulevard Macdonald
75017, Paris, France
More Information

Powered By SPE

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals

SPE ImplementAM

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals

SPE-Inspiring Plastics Professionals




spe2018logov4.png
  Welcome Page

How to reference articles from the SPE Library:

Any article that is cited in another manuscript or other work is required to use the correct reference style. Below is an example of the reference style for SPE articles:

Brown, H. L. and Jones, D. H. 2016, May.
"Insert title of paper here in quotes,"
ANTEC 2016 - Indianapolis, Indiana, USA May 23-25, 2016. [On-line].
Society of Plastics Engineers
Available: www.4spe.org.

Note: if there are more than three authors you may use the first author's name and et al. EG Brown, H. L. et al.

If you need help with citations, visit www.citationmachine.net