SPE-Inspiring Plastics Professionals

2025 Fellow of the Society Award Recipients

SPE HSM Award

The following professionals received the SPE Fellow of the Society Award for 2025

The Fellow of Society program honors SPE members for their outstanding contributions in the field of plastics engineering, science/technology, or in the management of such activities. Candidates must be sponsored by an SPE Section, Technical Division or Special Interest Group and elected by the Fellows Election Committee based on their professional record as well as written sponsorships from at least two SPE members.

Dr. Hiroshi Ito
Dr. Hiroshi Ito
Nominated by the SPE Engineering Properties and Structure Division

Dr. Hiroshi ITO studied in Yamagata University, Japan from Undergraduate to Graduate School and received Doctor of Engineering in 1996. He started his academic career from 1993 as an Assistant Professor at Tsuruoka National College of Technology and in 1996 he moved to Tokyo Institute of Technology. He has been a full Professor at Yamagata University since 2010. Dr. ITO’s research field is to clarify and control the development of higher-order structure in polymeric materials through experimental and theoretical studies on the polymer processing. His research projects cover various types of polymer processing. His innovative research in this area indicates the successful development of advanced polymer processing technologies for various polymers, its blend, and composites. He has achieved many awards and recognition. He has been continuing to receive research grants since 1994. He has published over 190 papers in International Academic Journal, 34 Book Chapters, has achieved over 20 patents and has over 55 Invited lectures.

Dr. Richard J. Spontak
Dr. Richard J. Spontak
Nominated by the SPE Theroplastic Elastomers TIG

Dr. Richard J. Spontak is a Distinguished Professor of Chemical & Biomolecular Engineering and Professor of Materials Science & Engineering at NC State University. He received his B.S. degree from the Pennsylvania State University in 1983 and his Ph.D. from the University of California at Berkeley in 1988. He pursued post-doctoral research at the University of Cambridge (UK) and the Institute for Energy Technology (Norway) before joining the Corporate Research Division of the Procter & Gamble Co. in 1990. In 1992, he accepted a faculty position at NC State University, where he supervises the Macromolecular Materials & Morphology Group. He has published over 300 peer-reviewed journal papers in high-profile journals such as Science, Nature Materials and Advanced Materials, as well as 40 scholarly works as book chapters and invited monographs, and his work has been featured on 32 journal covers. Dr. Spontak has delivered over 400 invited lectures around the world. His primary research interests relate to the identification of key chemistry-structure-property-processing (CSPP) relationships in nanostructured polymers (e.g., block copolymers, especially thermoplastic elastomer [TPE] systems), polymer nanocomposites and coatings, and stimuli-responsive soft materials, as well as advanced electron microscopy. His research achievements include (1) developing anionic TPEs as rapid, self-cleaning antimicrobial surfaces, solar cells, electroactive media, high-efficiency bipolar electrolyzers, and high-flux gas-separation membranes; (2) establishing fundamental CSPP relationships in TPEs chemically-functionalized for various contemporary applications; (3) employing both experiments and simulations to elucidate the underlying polymer physics regulating the unique morphological and mechanical behavior of oil-extended TPEs, including isothermal time-composition superpositioning, binetwork synergy, network formation, and complex phase behavior; (4) physically-functionalizing commercial TPEs to enable their 21st - century use as promising tunable electroelastomers, shape-memory materials and giant-strain microfibers; and (5) designing plastics for interactions with carbon dioxide as a processing aid for foaming/blending or as high-permeability/selectivity carbon-capture membranes. He has served as a fellow or visiting professor at universities around the globe, for which he received the NC State Outstanding Global Engagement and Jackson Rigney International Service Awards. In recognition of his research at NC State, Dr. Spontak has been awarded the Alexander Q. Holladay Medal for Excellence (the highest university faculty award), the R.J. Reynolds Award for Excellence in Teaching, Research & Extension (the highest engineering faculty award), the Alcoa Foundation Distinguished Engineering Research Award, and the Alumni Outstanding Research Award. In addition, he has received the Society of Plastics Engineers International Award, the ACS (Rubber Division) Chemistry of Thermoplastic Elastomers Award, the Institute of Materials, Minerals and Mining (IOM3) Colwyn Medal, the Institute of Chemical Engineers Underwood Medal and Global Award (Research Project), the American Chemical Society (ACS) (PMSE Division) Roy W. Tess Award in Coatings and the Cooperative Research Award in Polymer Science & Engineering, the Society of Polymer Science (Japan) International Award, and the German Society for Electron Microscopy Ernst Ruska Prize. An elected fellow of the American Physical Society, the IOM3, the Royal Society of Chemistry, and the ACS (PMSE Division), Dr. Spontak was named the Lars Onsager Professor at, and received an honorary doctorate (doctor honoris causa) from, the Norwegian University of Science & Technology, and is a member of the Norwegian Academy of Technological Sciences. He was recognized by the Tau Beta Pi Engineering Honor Society with the Distinguished Alumnus and McDonald Mentor Awards, and he is also an award-winning instructor, having received every teaching award at NC State University, including the Board of Governors' Award for Excellence in Teaching (the highest university teaching award). He lives in Raleigh with his wife, Josie.

Dr. Xiaoxi Wang
Dr. Xiaoxi Wang
Nominated by the SPE Thermoplastic Materials & Foams Division

Dr. Xiaoxi Wang is an Associate Technical Fellow and Senior Plastic Materials & Process Engineer at Boeing Commercial Airplanes, specializing in the design, development, and implementation of advanced plastic materials and composites for aviation and industrial applications. With a Ph.D. in Mechanical Engineering from the University of Washington, Dr. Wang has led multi-million-dollar projects improving aircraft interiors and manufacturing processes, driving innovations in materials like urethane foams, aramid cores, and performance plastics. Holding over 100 patents globally and recognized with numerous awards, including Boeing’s Special Invention Award, Dr. Wang is a leader in mentorship, professional societies, and technical advisory roles, furthering advancements in material sciences and engineering.

spe2018logov4.png
Welcome Guest!   Login